banner-products

PICK AND PLACE

FUJI-NXT-III-Pick-and-Place-Machine

FUJI Pick and Place Machine

FUJI Pick and Place Machine

 Features of FUJI Pick and Place Machine

High speed FUJI pick and place machine, FUJI chip mounter, FUJI pick and place equipment, supporting any kind of production.

The NEW NXT III is a highly productive, multi-functional modular placing machine. Built for speed, it features a faster XY robot and tape feeders, as well as a new H24 head that achieves 35,000 chips per hour. The NXT III supports the smallest parts being used in mass production with extreme placing accuracy.
A faster XY robot and faster tape feeders, as well as a newly developed "flying vision" parts camera, mean increased placing ability for all part sizes and types.
The new H24G high-speed head achieves 37,500 cph (chips per hour) (Productivity priority mode) per module, a 44% improvement from the fastest speed of the NXT II.
1. 0201 mm Part Support, +/- 0.025 mm Placing Accuracy
As well as supporting the smallest parts currently being used in mass production (0402 mm, 01005"), the NXT III can also handle the next generation of components heading for the market - 0201 mm parts.
By improving machine rigidity and further refining its independent servo control and vision recognition technology, Fuji has achieved a placing accuracy for small chip parts of +/- 0.025 mm* (3sigma, Cpk≥1.00).
* Under conditions at Fuji.
2. Improved Usability
The GUI of the original NXT was widely praised for making use of intuitive and easy-to-understand pictograms instead of relying on language-based instructions.
This interface is now combined with a touchscreen panel to make operation even easier. This reduces the number of button pushes required and makes selecting commands easier, as well as improving quality by reducing the chance of performing the wrong command.
3. High Compatibility
Many of the main units from the NXT II such as placing heads, nozzle stations, feeders, tray units, and feeder pallet exchange units can be used on the NXT III without any modifications.
❙ Specification of FUJI Pick and Place Machine

Item
M3 III
M6 III
Applicable PCB size (LxW)
48 x 48 mm to 250 x 510 mm (double conveyor)*
48 x 48 mm to 250 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
48 x 48 mm to 534 x 510 mm (double conveyor)*
48 x 48 mm to 534 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
Part types
Up to 20 types of parts (calculated using 8 mm tape)
Up to 45 types of parts (calculated using 8 mm tape)
PCB loading time
For double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules), 3.4 sec (transport between M6 III modules)
Placement accuracy
(Fiducial mark standard)
* The placing accuracy is obtained from tests conducted by Fuji.
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
Productivity
* The throughput above is based on tests conducted at Fuji.
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
GL : 16,363 dph (0.22 sec/dot)
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08M : 13,000 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
0F : 3,000 cph
GL : 16,363 dph (0.22 sec/dot)
Supported parts
H24G : 0201 to 5 x 5 mm Height : up to 2.0 mm
V12/H12HS : 0402 to 7.5 x 7.5 mm Height : up to 3.0 mm
H08M : 0603 to 45 x 45 mm Height : up to 13.0 mm
H08 : 0402 to 12 x 12 mm Height : up to 6.5 mm
H04 : 1608 to 38 x 38 mm Height : up to 9.5 mm
H04S/H04SF : 1608 to 38 x 38 mm Height : up to 6.5 mm
H02/H02F/H01/0F : 1608 to 74 x 74 mm (32 x 180 mm) Height : up to 25.4 mm
G04/G04F :0402 to 15 x 15 mm Height : up to 6.5 mm

Module width
320 mm
645 mm
Machine dimensions
L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III)
W: 1900.2 mm, H: 1476 mm
DynaHead(DX)
Nozzle quantity 12 4 1
Throughput(cph)
25,000
Parts presence function ON: 25,000
11000 4700
Part size (mm)
0402 (01005") to 7.5 x 7.5
Height:Up to 3.0 mm

1608 (0603")to 15 x 15
Height:Up to 6.5 mm
1608 (0603")to 74 x 74 (32 x 100)
Height:Up to 25.4 mm
Placing accuracy
(Fiducial mark based referencing)
+/-0.038 (+/-0.050) mm (3σ) cpk≥1.00*
*+/-0.038 mm obtained with rectangular chip placement (high
accuracy tuning) under optimal conditions at Fuji.
+/-0.040 mm (3σ) cpk≥1.00
+/-0.030 mm (3σ) cpk≥1.00
Part presence check
o
x
o
Parts supply
Tape
o
o
o
Stick
x
o
o
Tray
x
o
o
Parts supply system
lntelligent feeders
Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide tape
Stick feeders
4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤ 32 mm (18 ≤ Stick width ≤ 36 mm)
Trays
Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray Unit-M),276 x 330 mm (Tray Unit- LT), 143 x 330 mm (Tray Unit-LTC)
Options
Tray feeders, PCU II (Pallet Change Unit), MCU (Module change unit), Engineering panel stand, FUJI CAMX Adapter, Nexim Software
 Company Profile

ETA-Company-Proflie

ETA is the SMT machine supplier with professional 25-year-experienced sales and after sales team, providing SMT solutions including pick and place machinereflow oven, SMT stencil printer, SMT line and wave soldering machine.

We also is the partner of JUKI pick and place machine and Hanwha/Samsung pick and place machine, can provide the best SMT technical services and accessories support for JUKI, HANWHA/SAMSUNG, YAMAHA, PANASONIC brands.

Successful Experience:

Eta's Customer In 35 Countries Around the World

1. We Have Been Helping Customers To Build a Lot of New Factories Around the World.

2. Training More Than 500 Experts and Technician for Customers.

3. Became the Most Reliable Chinese Partner for You.

For SMT Factory Setup, We Can Do for You:

1.  We Provide Full SMT Solution for You

2.  We Provide Core Technology With Our Equipments

3.  We Provide The Most Professional Tech Service

4.  We Have Wealthy Experience on SMT Factory Setup

5.  We Can Solve Any Question About SMT

❙ ETA SMT Machine Exhibition

SMT Line Machine

Reflow Oven

❙ ETA SMT Line Machine Certificate

SMT-Machine-CE

❙ ETA Global Service

ETA Global Service 1.jpg

❙ Customers' Feedback

ETA Customers Feedback.jpeg

❙ FAQ

Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support and Service.
 
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
 
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
 
Q: What is your payment terms?
A: 30% deposit in advance and 70% balance before shipment.
 
Q: What your main customers?
A: Huawei,Foxconn,Vtech,Sumida,Kemet,Vishay,Bosch,Canon.
 
Q:  Why choose us?
A: Leading SMT Supplier in China; Trade assurance to USD 560,000+; Professional after-sales service team.
❙ Packaging & Shipping
SMT Line Machine

 

If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products.

 FUJI Pick and Place Machine Video

Page search keywords: FUJI Pick and Place Machine,By I.C.T SMT Pick and Place Machine Manufacturing,WaweisIt mainly produces: Reflow Oven, Pick and Place Machine, SMT Machine.