Eyelet Pin Insert Machine

❙ Introduce of Eyelet Pin Insert Machine

1. Speeds up to 12000/hour; 2. Bent foot detection, automatic recognition; 3. Dual bowl feeder for efficient and simple feeding; 4. Low maintenance feeder technology; 5. Double head work, higher speed and better stability.

Feeder Station 1. Vibrating feeder sequence bulk rivet/Eyelet pin to length rail; 2. Use Eyelet/Pin's weight through length rail slide down to feeder slider; 3. Feeder Cylinder drive the feeding slider to push the eyelet/pin on arc rail one by one; 4 . Pressure air put eyelet/ pin through arc rail and push it to the material Clip of insertion Head.

X-Y Working Area 1. The Loader conveyor transport the PCB to X-Y work table, X-Y servo motor to drive the X-Y work table positioning; 2. After base part of Insertion Head finish the insertion (Detection system will inspect the insertion successfully into the next step, if not finish then repeat this action), X-Y work table will transport the completed insertion PCB to Unloader conveyor

Insertion Part 1. Head Cylinder drive the insertion rod and under pressure, guide pin through eyelet/pin pisitioning; 2. Conical part of slide nozzle will push rocker arm with material clamping to opening to both sides, Slide nozzle will press Eyelet/pin to the through hole of PCB

❙ Specification of Eyelet Pin Insert Machine

Model	I.C.T-S7000
Insertion rate	12000PCS/ H
PCB Size	50*50-400*400mm
PCB Thickness	0.79-2.36mm
Component Height	0-18mm
Component Interval	3mm
Insert head	2 pcs
Machine size (mm)	1700*1500*1800mm
Weight	1800kg
Power supply	AC220V 50HZ/60HZ 2.0KVA

❙ Introduce of Automatic Soldering Robot

Soldering Principle:
Operation mode: Multi-axis drive manipulator and software control to achieve precise positioning of the welding head.
Welding method: high temperature eddy current heating with a soldering iron.
Working principle: Fix the soldering iron on the robot, move to the specified welding coordinates, and automatically feed the wire at the tip; the soldering iron is welded at high temperature and engaged with the target.
Introduce:
I.C.T soldering robot is a soldering robot with soldering wire feeding motion system. high frequency heartig system with rapid heat recovery, soldering tip is easy to te exchanged with low cost .Break tin automatic solder wire feeder can reduce flux remaining problem after soldering.

Applications:

❙ Specification of Automatic Soldering Robot

Model	I.C.T-SR300	I.C.T-SR530	I.C.T-SR250D	I.C.T-SR250DD
Platform Number	1	1	2	2
Head Number	1	2	1	2
Heating Power	150W	300W	150W	300W
Max. PCB Size(mm)	300*300	500*300	250*250 for each Platform	250*250 for each Platform
Driving Mode	Step Motor
Control Mode	Teach Pendant
Dimension(mm)	620*660*770	780*660*770	780*660*770	780*660*770
Weights	60 Kg	65 Kg	70 Kg	75 Kg

Click Here Get More Informaion!

❙ I.C.T Eyelet Pin Insert Machine Video