banner-products

PICK AND PLACE

SMT-Squeegee-Cleaning-Machine-ETA-4200

ETA Squeegee Cleaning Machine ETA-4200


Introduction

ETA-4200 Fixture Cleaning Machine is used to clean grease, solder paste, dusts on the

 surface of all kinds of SMT Printer Squeegee,tray, reflow oven cooler and filter , chains, and

 nets...etc.

ETA-4200 is made up of wash unit, rinse unit, dry unit, rotation cleaning basket unit and

control unit. Put the dirt SMT squeegee on to the cleaning basket, setting the cleaning

 parameters, the machine will automatically complete wash, rinse and dry process by just

 pushing start key. The squeegee after cleaning is very clean and dry, ready to use at any

 time.

Features

1.Total SUS 304 structure, resist Acid and Alkali corrosion, firm and attractive.

2.1 meter diameter big cleaning round basket, can clean 20~40 pcs fixtures at one time.

3.Clean liquid spray from 3 spray rods on upper/lower and front side, cleaning basket rotates

 during cleaning. 4.Clean liquid pressure up to 6kg/cm2, make it throughly clean of whole

 fixture.
5.PLC program control, Touch-panel operation,cleaning parameters can be set and change

 conveniently.
6.Easy One-button operation, high pressure clean+ rinse+ hot air dry, all process complete in

 a cycle automatically. 7.Clean liquid and water heat and temperature keeping function.

8.Closed-loop clean and rinse, clean detergent and rinse water are cycling filtered and reused

 in the machine. 9.Standard equipped solution and water auto fill in and discharge function.

10.The squeegee are clean and dry after cleaning, standby and ready for use at any time.

Page search keywords: Squeegee Cleaning Machine,By ETA SMT Pick and Place Machine Manufacturing,WaweisIt mainly produces: Reflow Oven, Pick and Place Machine, SMT Machine.